ZG-90 Rapid-Dry Galvanising Coating – 500 ml

Action Can ZG-90 is a rapid-drying, silver galvanising coating for touching up galvanised steel, welding joints, cut ends, fasteners and exposed metalwork.

Specifications

• Size: 500 ml aerosol
• Product reference: 32811
• Touch dry: approximately 2 minutes at 20°C
• Hard dry: approximately 20 minutes at 20°C
• Approximate coverage: 1.6 m² at 30 μm in one coat
• Maximum cured-film temperature: 150°C

Application and safety

Remove rust and scale, then ensure the surface is clean, dry and grease-free. Shake thoroughly and apply two or three light coats from 15–20 cm away, following the label and technical data sheet.

Use only with adequate ventilation and keep the aerosol away from heat, sparks and naked flames. Do not use inside water-storage tanks, and remove the coating before welding.