Pool Plant & Pipework

BUILD THE PIPEWORK AROUND THE JOB

Bring the pipe, fittings and service connections together for your swimming-pool pipework. Choose a clear route for new installations, plant-room alterations and repairs, starting with the dimensions and connections on your equipment.

Shop swimming-pool fittings · Get help with a pool pipework list

Start with the pipe system

Identify whether the installation uses metric or imperial PVC before choosing pipe and fittings. Match the material, connection dimensions and pressure rating to the system.

• Metric PVC pipe & fittings — browse millimetre-sized pipe and matching connections.
• Imperial PVC pipe & fittings — browse inch-sized pipework, unions and adaptors.
• Swimming-pool fittings — white pool fittings, return inlets, wall adaptors and specialist connections.

Choose parts for the job

New pipe runs and plant-room alterations

Build the run from the chosen pipe system: pipe lengths, elbows, tees, sockets and any required reducers. Include suitable isolation and service access where the equipment specification calls for it. Select jointing products approved for the pipe material and pressure application.

Shop metric pipework · Shop imperial pipework

Equipment connections and service access

Check the connections on the equipment before selecting unions or threaded adaptors. Confirm the tube or pipe size, thread standard, seal arrangement and space available for servicing.

Browse pool unions, adaptors and sight glasses

Repairs and replacement fittings

Match the existing pipe dimensions and connection type before ordering a replacement. A photo of the joint, any markings and a measured pipe outside diameter help identify the part.

View PIPEMATE repair adaptors · Get help identifying a replacement

Pool-wall and return connections

Choose the correct wall adaptor or return inlet for the pool construction and connection arrangement. Check whether the installation is concrete or vinyl/liner, then confirm the dimensions and sealing requirements on the product listing.

Browse return inlets and wall adaptors

Prepare a complete pipework list

1. Identify metric or imperial pipe, its material, size and required rating.
2. List pipe lengths and quantities, then elbows, tees, sockets and reducers.
3. Record the exact equipment connections and required unions or adaptors.
4. Include compatible seals, supports and approved jointing materials.
5. Check access for servicing and confirm any isolation or bypass arrangement against the equipment instructions.

Save exact products and quantities to a List as you plan. For a project or volume requirement, include the equipment details and pipework layout when requesting help.

Help with a pool pipework project · Check BSP, NPT and other thread types