Above ground
For surface runs in borders, hedges and planting beds. Choose a surface line such as Rain Bird XFD or a dual-use line such as Netafim UniTechline AS.
Above groundRead the installation guideChoose where the line will sit and the flow from each emitter. See matching coils without searching through fittings.
For surface runs in borders, hedges and planting beds. Choose a surface line such as Rain Bird XFD or a dual-use line such as Netafim UniTechline AS.
Above groundRead the installation guideChoose a line designed for subsurface use, such as Rain Bird XFS or Netafim UniTechline AS. Burial depth, filtration and flushing must suit the design.
Below groundRead the installation guideLitres from each emitter in one hour, not the flow from the whole coil. At the same spacing, 2.3 L/h uses more water per hour than 1.6 L/h. Choose around soil, planting and the available supply.
Compare flow rates in the guideChoose above ground, below ground or an emitter flow to see matching coils.
A 100 m coil is a purchase length. Check the maximum length of each individual run for the selected dripline. Match fittings to the exact dripline system. A 16 mm or 17 mm label alone does not guarantee compatibility.
Dripline buying guide
Which dripline do I need?
Above ground or buried, emitter spacing and the essential fittings.
Read the guide →
SKU: X36370
SKU: X36372
SKU: X36374
SKU: X36375
SKU: X36373
SKU: LDP016025
SKU: 100-T-TAP
SKU: 100-T-TAP-AG-PHONE
SKU: 100-T-TAP-UG
SKU: 100-T-TAP-UG-PHONE
SKU: 60142
SKU: 32000-008400
SKU: 32000-007850
SKU: LDP016050
SKU: LDP020050
SKU: LDP025100
SKU: 14690-002500
SKU: 14690-003500
SKU: X33010MX